- ページ 11

トランシーバー Alinco DR-510TのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Alinco DR-510T 16 ページ。 Vhf/uhf dual band fm transceiver
Alinco DR-510T にも：取扱説明書 (8 ページ)

ページを印刷する

VHP or UHF Band Scan

This Scan will cover the entlre tun-

ing ränge of VHP or UHF.

1. Press the VFO/M key to select

the VFO mode, then select the

band, VHF or UHF.

2. Store the same frequency Into

Memory Channels A and 8.

3. Betöre pressing the SCAN key,

adjust the SQL control to the

threshold level.

4. Press the SCAN key to Initiate

Scan.

5. To clear scanning, press the

SCAN key or the microphone

P.T.T. Switch.

•The transceiver will stop on a busy

Channel until the Signal drops.

After a Short delay the scan will

resume.

•If you want to resume scanning

when the transceiver stops on a

busy Channel, rotate the Main Dial

or press the microphone UP/

DOWN buttons.

PRIORITYSCAN

The following Priority Scan options are

available:

Memory Priority Scan

VFO Priority Scan

CALL Priority Scan

A. Memory Priority Scan

1. Store the desired priority fre

quency into any Memory.

2. Select VFO mode, and dial up

the frequency you want to oper-

ate on.

3. Press the PRI key to initiate

Memory Priority Scan.

The transceiver will scan the

Priority in Memory for 1 second

out of 6 seconds and the VFO

frequency for the remaining 5

seconds.

4. When a Signal is present on the

Priority Memory Channel, press

the PRI key, and then press the

VFO/M key. The Priority scan

will stop and the Memory Chan

nel will come to the display.

B. VFO Priority Scan

This function is the reverse of Mem

ory Priority Scan.

1. Select VFO mode, and dial up

the frequency to be scanned.

2. Select the desired Memory you

want to operate on.

3. Press the PRI key to initiate VFO

Priority Scan.

4. To cancel this scan, press the

PRI key again.

-11-