- ページ 17

ラジオ Alinco DR-135のPDF ディーラーズマニュアルをオンラインで閲覧またはダウンロードできます。Alinco DR-135 20 ページ。 Vhf fm mobile transceiver

A.1 Automatic Numbering Identification (ANI)

This feature allows the transceiver to automatically send the programmed

DTMF codes (up to 16 digits) just after the

released so that the base station can identify the unit.

Two auto dialer memories, Nos. 8 and 9, are reserved for the ANI transmission.

You can enable or disable the ANI function by using the Channel Data Editor

software.

• When memory No. 8 contains DTMF codes, the transceiver sends the codes

just after the

• When memory No. 9 contains DTMF codes, the transceiver sends the codes

just after the

• When both Nos. 8 and 9 contains DTMF codes, the transceiver sends the

codes immediately after the

• When memory Nos. 8 and 9 are empty, the transceiver does not output any

DTMF code when the

Examples are given in the table below.

DTMF codes in dialer memories

A.2 Priority Watch (PRI)

Priority Watch monitors a channel different from the indicated frequency.

Every 5 seconds, the transceiver switches from the indicated frequency to the

priority channel.

If a signal is received on the priority channel, the reception time is extended to

2 seconds.

To stay in Priority channel, push

key is pressed.

key is released.

key is pressed or released.

No. 8

No. 9

8888

9999

8888

9999

key is pressed and/or

key is pressed and released.

DTMF codes to be sent

Just after

is pressed

is released

8888

key when Priority channel is on.

9999