ページを印刷する
Connect the quick plug with electrode holder to the positive terminal and then
tightened them up clockwise.
4.4 Workpiece Connection
Connect the quick plug with earth clamp to the negative terminal on the front panel
below. And then tighten them up. Access the earth clamp to the workpiece.
Warning!
It is forbidden to connect the workpiece to the welder with iron or other poor
conductors.
NOTES: The case protection class is IP21S. Finger or round bars especially
metal rod must be less than 12.5mm and it can not be inserted into the welder.
Also you can not press it heavily.
1. Power Indicator
5. Negative Terminal
5 Operation Instruction
2. High Temperature
6. Power Source Cable
10
3. Knob
4. Positive Terminal
7. Power Switch
8. Fan