- ページ 2

オール・イン・ワン・プリンター Brother DCP-1612WのPDF クイック・セットアップ・マニュアルをオンラインで閲覧またはダウンロードできます。Brother DCP-1612W 2 ページ。 Letter / a4 black-and-white multifunction printer
Brother DCP-1612W にも： 取扱説明書 (7 ページ), クイック・セットアップ・マニュアル (2 ページ), クイック・スタート・マニュアル (2 ページ)

ページを印刷する
Brother DCP-1612W クイック・セットアップ・マニュアル
4A
Configuration using the CD‑ROM (Windows
NOTE:
If the Brother screen does not appear automatically, go to Computer (My Computer).
(For Windows
8: click the
®
Double‑click the CD‑ROM icon, and then double‑click start.exe.
Connection Type
4B
Configuration without using the CD‑ROM (Windows
Download the full driver and software package from the Brother Solutions Center.
(For Windows
)
solutions.brother.com/windows
®
(For Macintosh)
solutions.brother.com/mac
After you download the driver and software package, follow the on‑screen instructions until the Connection Type screen appears. Refer to
(Windows
®
).
4C
One‑push wireless setup for mobile devices (Wireless models only)
If your wireless LAN access point/router supports automatic wireless (one‑push) setup (WPS/AOSS™), you can set up your machine without using a computer.
Press the WPS or AOSS™ button on your
wireless LAN access point/router.
Print using your mobile device
Download "Brother iPrint&Scan" to start using your machine with mobile devices.
solutions.brother.com/ips
Brother support website http://support.brother.com
(File Explorer) icon on the taskbar, and then go to Computer.)
Wireless Network Connection
Press and hold the WiFi button on your
machine for about 2 seconds. The WiFi
button will light up when connected.
)
®
For USB Connection
For Wireless Network Connection
We recommend preparing a USB cable
to use temporarily during the wireless
setup.
[Recommended]
Select this option if you have a USB cable to
use temporarily for wireless setup.
Select this option if you do not have a USB cable.
Wireless setup is now complete.
NOTE:
Before you can use your machine with your mobile device, download
"Brother iPrint&Scan."
Follow the on‑screen
instructions until the
Connection Type screen
appears.
Follow the on‑screen
instructions to continue
installation.
NOTE:
If connection is unsuccessful, repeat this step.
Follow the on‑screen
instructions to continue
installation.
NOTE:
If connection is unsuccessful, repeat this step.
without CD‑ROM drive or Macintosh)
®
4A
Configuration using the CD-ROM
Finish
Finish