ページを印刷する
stinger.
10. Collect the aluminum tube and carbon ribs and wing tip for one wing. The left wing components are
marked with red spots - the right with green. On the ribs, there's an indication on the colored spot, of the
edge that goes up. Remove the wing tip bag - you can roll it and secure with the Velcro strap or stuff in
your back pocket. The description from here is based on the left wing assembly and you will have to
mirror that process for the right.
11. Start the tube end with the key into the last section of the sail (between the last and next to last fish
cams) and rest the outer end on the ground. Stand behind the sail and open the Velcro of the third
section to see the end of the D-cell. This will allow you to elevate the tube with your left hand as you
guide it into the D-cell with your right making sure to not trap parts of the internal material.