- ページ 22

プリンター Brother DCP-7040のPDF クイック・セットアップ・マニュアルをオンラインで閲覧またはダウンロードできます。Brother DCP-7040 32 ページ。 Quick setup guide - spanish
Brother DCP-7040 にも：クイック・セットアップ・マニュアル (20 ページ), クイック・セットアップ・マニュアル (18 ページ), クイック・セットアップ・マニュアル (19 ページ), (クイック設定ガイド (20 ページ)

STEP 2

Installing the Driver & Software

Important

Make sure that you have finished the

instructions from step 1 Setting Up the

Machine on pages 8 through 11.

Note

For Mac OS X 10.2.0 to 10.2.3 users, upgrade to

Mac OS X 10.2.4 or greater. (For the latest

information for Mac OS X, visit

http://solutions.brother.com)

Plug the AC power cord into an AC outlet. Turn

the power switch on.

Remove the label covering the USB interface

socket.

Connect the USB interface cable to your

computer, and then connect it to the machine.

Improper Setup

DO NOT connect the machine to a USB port on

a keyboard or a non-powered USB hub.

Brother recommends that you connect the

machine directly to your computer.

Turn on your Macintosh.

Put the supplied CD-ROM for Macintosh into

your CD-ROM drive.

Double-click the Start Here OSX icon to install.

Follow the on-screen instructions.

Note

• Please see the Software User's Guide on the

CD-ROM to install the PS driver. (DCP-7045N only)

• Please wait, it will take a few seconds for the

software to install. After the installation, click

Restart to finish installing the software.

The Brother software will search for the Brother

device. During this time the following screen

will appear.