- ページ 12
モニター LG 22M47HQのPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。LG 22M47HQ 37 ページ。 Lg 22m47d; 22m47vq; 22m47h; 22m47hq; 23m47d;
23m47vq; 23m47h; 24m47vq; 24m47h; 24m47d;
24m47hq led lcd monitor
LG 22M47HQ にも： オーナーズマニュアル (37 ページ), オーナーズマニュアル (37 ページ), オーナーズマニュアル (37 ページ)
ページを印刷する
12
ASSEMBLING AND PREPARING
Mounting on a wall
For proper ventilation, allow a clearance of 100
mm (3.94 inches) on each side and from the
wall. Detailed instructions are available from your
dealer, see the optional Tilt Wall Mounting Bracket
Installation and Setup Guide.
100 mm
(3.94 inches)
If you intend to mount the Monitor set to a wall,
attach Wall mounting interface (optional parts) to
the back of the set.
When you install the Monitor set using a wall
mounting interface (optional parts), attach it
carefully so it will not drop.
1
If you use screw longer than standard, the
monitor might be damaged internally.
2
If you use improper screw, the product might be
damaged and drop from mounted position.
In this case, LG Electronics is not responsible
for it.
Model
22M47D
22M47VQ
22M47H
22M47HQ
Wall Mount
(A x B)
Standard
screw
Number of
screws
Wall Mount
Plate
(Optional)
100 mm
(3.94 inches)
100 mm
(3.94 inches)
100 mm
(3.94 inches)
23M47D
24M47D
23M47VQ
24M47VQ
23M47H
24M47H
24M47HQ
75 x 75
M4 x L10
4
LSW 149
VESA (A x B)
y
CAUTION
Disconnect the power cord first, and then
y
move or install the Monitor set. Otherwise
electric shock may occur.
If you install the Monitor set on a ceiling or
y
slanted wall, it may fall and result in severe
injury.
Use only an authorized LG wall mount
y
and contact the local dealer or qualified
personnel.
Do not over tighten the screws as this may
y
cause damage to the Monitor set and void
your warranty.
Use only screws and wall mounts that
y
meet the VESA standard. Any damages
or injuries by misuse or using an improper
accessory are not covered by the warranty.
Screw length from outer surface of back
y
cover should be under 8mm.
Wall mount Pad
Wall mount Pad
Back Cover
Standard screw
Max.8mm
NOTE
Use the screws that are listed on the VESA
y
standard screw specifications.
The wall mount kit will include an installation
y
manual and necessary parts.
The wall mount bracket is optional. You can
y
obtain additional accessories from your local
dealer.
The length of screws may differ depending
y
on the wall mount. Be sure to use the proper
length.
For more information, refer to the
y
instructions supplied with the wall mount.
Back Cover