- ページ 21

プリンター Brother TD-4100NのPDF ネットワーク・ユーザー・マニュアルをオンラインで閲覧またはダウンロードできます。Brother TD-4100N 39 ページ。 Network users manual - spanish
Brother TD-4100N にも：技術仕様 (4 ページ), ソフトウェア取扱説明書 (40 ページ), ユーザーマニュアル (36 ページ), ユーザーマニュアル (37 ページ), マニュアル (20 ページ), (スペイン語）グ (40 ページ), (スペイン語）取扱説明書 (39 ページ)

Configuring the standard TCP/IP port

For Windows Vista

Click the Start button, Control Panel, Hardware and Sound, and then Printers.

Click Add a printer.

Choose Add a local printer.

You must now choose the correct Network printing port. Choose Create a new port and choose

Standard TCP/IP Port from the pull-down window, then click Next.

Enter the IP address, or the print server name you wish to configure. The Wizard will automatically enter

the Port name information for you, then click Next.

Windows Vista

will now contact the printer that you specified. If you did not specify the correct IP

address or name then an error dialog will appear.

Now that you have configured the port, you must specify which printer driver you wish to use. Choose

the appropriate driver from the list of supported printers. If you are using a driver supplied with the printer

on CD-ROM then choose the Have Disk option to browse to the CD-ROM.

For example, choose the "X:\your language\Drivers\TD-XXX\x86 or x64\Driver\i386 or x64" folder (where

X is your drive letter. XXX is your model name). Click Open, and then OK. Choose your printer model,

then click Next.

Specify a name and click Next.

Note

• When the User Account Control screen appears, click Continue.

• If the printer driver that you are installing does not have a Digital Certificate you will see a warning

message. Click Install this driver software anyway to continue with the installation.

Continue through the Wizard clicking Finish when complete.

Network printing: basic TCP/IP Peer-to-Peer printing