- ページ 7

ノートパソコン Fujitsu Lifebook C2310のPDF バイオマニュアルをオンラインで閲覧またはダウンロードできます。Fujitsu Lifebook C2310 31 ページ。 Lifebook c series
Fujitsu Lifebook C2310 にも：ソフトウェアマニュアル (39 ページ)

ページを印刷する

Table 2: Fields, Options and Defaults for the Primary Master Submenu of the Main Menu

Menu Field

Options

Sectors:

• A number

between

0 and 63

Maximum

• Display only

Capacity:

LBA Format (Logical Block Addressing)

Total

–—

Sectors:

Maximum

–—

Capacity

Multi-

• Disabled

• 2 Sectors

Sector Trans-

• 4 Sectors

fers:

• 8 Sectors

• 16 Sectors

LBA Mode

• Disabled

• Enabled

Control:

Transfer

• Standard

• Fast PIO 1

Mode:

• Fast PIO 2

• Fast PIO 3

• Fast PIO 4

• Multiword

DMA 1

• Multiword

DMA 2

Ultra DMA

• Disabled

• Mode 0

Mode:

• Mode 1

• Mode 2

• Mode 3

• Mode 4

• Mode 5

A bootable CD-ROM may have a floppy disk format or a hard drive format. When the bootable CD-ROM is used,

the drive allocations change automatically without changing the BIOS setup. If a floppy disk format CD-ROM is

used, the CD-ROM becomes Drive A. The CD-ROM will only take Drive C: (hard drive format) if the internal hard

drive is not present or is disabled. The bootable CD-ROM can never use a C: designation if a formatted internal

hard drive is present, since the C: designator is always reserved for the internal hard drive. The boot sequence

ignores the new drive designations, but your application software will use the new designations.

Be careful of the operating environment when booting from a CD-ROM or you may overwrite files by mistake.

Default

Description

–—

This appears only when Hard Disk is selected. When it is selected, you can

change the value. This field is incremented by pressing the [Spacebar]. This

field is decremented by pressing the [-] key. The field can also be changed by

typing in the number.

–—

Displays the maximum capacity of the drive calculated from the

parameters of the hard disk when Hard Disk is selected.

–—

The total number of sectors on your hard disk.

–—

The maximum capacity of your hard disk.

[16 Sectors]

This option cannot be changed when Auto is selected. Specify the number of

sectors per block for multiple sector transfer.

[Enabled]

Enables or disables Logical Block Addressing in place of Cylinder, Head, Sector

addressing. This can't be changed when Auto is selected.

[Multiword

Selects the method for moving data to/from the drive. Autotype the drive to

DMA 2]

select the optimum transfer mode. This option cannot be changed when

Auto is selected.

[Disabled]

Selects the method for moving data to/from the drive. Autotype the drive to

select the optimum transfer mode. This option cannot be changed when

Auto is selected.

M a i n M e n u