- ページ 2
サーバー Fujitsu PRIMERGY DX920 S3のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Fujitsu PRIMERGY DX920 S3 14 ページ。
ページを印刷するInstructions
This document contains basic product and configuration information that will enable you to configure your system via
System-Architect.
Only the tool "System-Arcitect" will ensure a fast and proper configuration of your PRIMERGY server or your complete
PRIMERGY Rack system.
Please pay attention to the naming conventions:
You can configure your individual PRIMERGY server in order to adjust your specific requirements.
The System configurator is divided into several chapters that are identical to the current price list and PC-/ System-Architect.
Please follow the lines. If there is a junction, you can choose which way or component you would like to take. Go through
the configurator by following the lines from the top to the bottom.
IV
Section
S26361-XXX-XXX
Memory XXX MB
X times
max. X times per system
In one chapter you can only select as many components (here 3x) as the arrow indicates.
Please note that there are information symbols which indicate necessary information.
For further information see:
http://ts.fujitsu.com/products/standard_servers/index.html
https://partners.ts.fujitsu.com/com/order-supply/configurators/primergy_config/Pages/Currentconfigurators.aspx
Prices and availability see price list and PC-/ System-Architect
Subject to change and errors excepted
Memory, example
There are 3 free memory banks available.
The memory banks can be populated with 512MB, 1GB, 2GB and 4GB DDR Memory.
The maximum total amount of memory is 12GB.
It is possible to select memory upgrade options up to 3 times.
ECC with memory scrubbing-function and hot-spare memorybank is standard on the PRIMERGY BX600 S2 Server Blades.
S26361-XXX-XXX
Memory XXX MB
max. X times per system
Fujitsu PRIMERGY Server
System configurator and order-information guide
PRIMERGY BX920 S3
BX900 S1
System unit 1nd generation
BX920 S2
Dual Server Blade S2
(internet)
Status: 2013-12-30
3x
(extranet)
2 of 14