- ページ 5

スキャナー Fujitsu FI-5530C2のPDF インストール手順マニュアルをオンラインで閲覧またはダウンロードできます。Fujitsu FI-5530C2 6 ページ。 Image scanner
Fujitsu FI-5530C2 にも：はじめに (28 ページ), 仕様 (2 ページ), スタートマニュアル (27 ページ), スタートマニュアル (11 ページ), 洗浄方法 (2 ページ), 洗浄方法 (2 ページ), はじめに (11 ページ)

ページを印刷する

Fujitsu SCSI Scanner Installation Procedures

Typically the SCSI ports are located on the back of the scanner (the exceptions being

the Fi-5650C and Fi-6670\A which are on the front). Depending on the model the SCSI

port connector(s) may be one of the following:

A. 50-pin High Density (HD-50) or

B. 68-pin Wide SCSI.

Use the appropriate cable to connect the scanner to the SCSI controller in your PC and

ensure that all connections are securely fastened.

Special note: The Fi-6670A and Fi-6770A are equipped with a 68-pin Wide SCSI port

which is reserved for Hardware VRS usage only.

Finally connect the power cord to the scanner and a wall outlet then turn on the scanner.

For those models without a power switch plug in the power supply to the back of the

scanner. To establish communication between the Scanner and your PC system turn on

the scanner prior to turning on your system. The scanner power and LED/LCD display

will light up. Next after the scanner completes its startup initialization the LED/LCD will

display either ready or the number one. This indicates that the scanner is ready.

The New Hardware wizard will now pop up. Select search for the driver automatically

and follow the prompts. Since the driver is already installed on your system you do not

need to select search the internet. When completed you will see the scanner installed

under Imaging devices in Device Manager.

Step G: Scanning with ScandAll Pro.

To scan with Scandall Pro will require a little advance preparation because the Scan Menu has

three different scanner control zones (four if you include the "cancel" function).

1. Launch ScandAll Pro by clicking on the shortcut link on your desktop or manually by

clicking on Start, Programs, Fujitsu ScandAll Pro, Fujitsu ScandAll Pro.

2. After the Untitled Screen has open, click Scan on the Menu bar and go down to

zone three, then click Select Scanner.

3. Select the Fujitsu Twain source for your scanner by highlighting it and clicking

OK. You will only need to do this once unless you are scanning with multiple

sources.

4. Once you are back at the Untitled Screen click on Scan on the Menu bar and in zone

three click Select Settings to open the Twain User Interface..

5. Select the scanning parameters that you wish to use – Color mode, resolution,

paper size, etc...

6. Next under Scan Type choose either ADF or Flatbed in the dropdown box then

click OK.

7. Place your document in the ADF or on the Flatbed face down and click Scan on the

Menu bar and then in zone one the Scan Settings button. This is where you decide

what to do with the scanned image. E.G. Save to file, file type, file name, display

image after scan. For this test uncheck the Save to file box and click OK.

8. Now click Scan on the Menu bar and then back in zone one the Scan button.

9. After the documents are scanned the images will appear on the Untitled Screen.

Rev082708A

Windows 95\98\98SE\ME\2000\XP\Vista

Page 5 of 5