- ページ 32

プリントサーバー Brother MFC-8710DWのPDF クイック・セットアップ・マニュアルをオンラインで閲覧またはダウンロードできます。Brother MFC-8710DW 45 ページ。 Quick setup guide - english
Brother MFC-8710DW にも：マニュアル (30 ページ), マニュアル (36 ページ), クイック・セットアップ・マニュアル (45 ページ), ユーザーマニュアル (23 ページ), 製品安全マニュアル (23 ページ)

ページを印刷する

For Wireless Network Users

One push setup using WPS (Wi-Fi Protected Setup) or AOSS™

(Windows

Configure the wireless

settings

Confirm your wireless access point/router has

the WPS or AOSS™ symbol as shown below.

Place the Brother machine within range of your

WPS or AOSS™ access point/router. The

range may differ depending on your

environment. Refer to the instructions provided

with your wireless access point/router.

If you began the wireless setup from step 5 on

page 7, press 3 to choose WPS/AOSS.

Then go to d.

All other users, go to c.

On your machine, press Menu, 7 (Network),

2 (WLAN), 3 (WPS/AOSS).

When WLAN Enable ? is displayed, press a

or b to choose On and press OK. This will start

the wireless setup wizard.

Otherwise press Stop/Exit to exit from the

wireless setup wizard.

When Start WPS/AOSS on your

wireless access point/router.

appears, press the WPS or AOSS™ button on

your wireless access point/router. See the

user's guide for your wireless access

point/router for instructions. And then press

OK.

This feature will automatically detect which

mode (WPS or AOSS™) your wireless access

point/router uses to configure your machine.

and Macintosh)

Note

If your wireless access point/router supports WPS

(PIN Method) and you want to configure your

machine using the PIN (Personal Identification

Number) Method, see Configuration using the

PIN Method of WPS (Wi-Fi Protected Setup) in

the Network User's Guide.

A connection result message appears on the

LCD and a WLAN report will automatically be

printed.

If the connection failed, check the error code on

the printed report and refer to

Troubleshooting on page 33.

Wireless setup is now complete. A four

level indicator at the top right of your

machine's LCD will show the wireless

signal strength of your wireless access

point/router.

To install the MFL-Pro Suite, continue to

step 22.

For Windows

Users:

Now go to

page 37

For Macintosh Users:

Now go to

page 39