- ページ 20
プリントサーバー Brother MFC-J265WのPDF 上級ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Brother MFC-J265W 50 ページ。 Quick setup guide - spanish
Brother MFC-J265W にも： インストールマニュアル (35 ページ), クイック・セットアップ・マニュアル (33 ページ), ユーザーマニュアル (49 ページ), (クイック設定ガイド (35 ページ)
ページを印刷する
Chapter 5
Additional dialling
operations
Combining Quick Dial
numbers
Sometimes, you may want to choose from
several long distance carriers when you send
a fax. Rates may vary depending on the time
and destination. To take advantage of low
rates, you can store the access codes of long-
distance carriers and credit card numbers as
Speed Dial numbers. You can store these
long dialling sequences by dividing them and
setting them up as separate Speed Dial
numbers in any combination. You can even
include manual dialling using the dial pad.
(See Storing Speed Dial numbers in
chapter 7 in the Basic User's Guide.)
For example, you might have stored "555" on
Speed Dial: 03 and "7000" on Speed Dial: 02.
You can use them both to dial "555-7000" if
you press the following keys:
a
Press
(Speed Dial).
b
Press a or b to choose Search.
Press OK.
c
Enter 03.
d
Press a or b to choose Speed Dial.
Press OK.
e
Press a or b to choose Search.
Press OK.
f
Enter 02.
14
g
Press Mono Start or Colour Start.
You will dial "555-7000".
To temporarily change a number, you can
5
substitute part of the number with manual
dialling using the dial pad. For example, to
change the number to 555-7001 you could
press
(Speed Dial), choose Search,
5
press 03 and then press 7001 using the dial
pad.
Note
If you must wait for another dial tone or
signal at any point in the dialling
sequence, create a pause in the number
by pressing Redial/Pause. Each key
press adds a 3.5-second delay.