ページを印刷する
20
www.aeg.com
7.5 Installing and replacing
the CleanAir+ filter
The CleanAir+ filter is an activated
carbon filter that absorbs bad odours and
allows you to preserve the best flavour
and aroma for all foodstuffs without risk
of odour cross-contamination.
Handle the air filter carefully
to avoid scratching its
surface.
On delivery, the air filter is in
a plastic bag to preserve
performance.
Install the air filter before activating the
appliance.
1. Unpack the air filter from the plastic
bag.
2. Open the plastic housing and put the
pleated surface on the grid, fitting the
filter inside the marked area on the
gridded surface.
3. Hold the filter down while closing the
plastic housing until you hear a click.
4. Remove the top glass shelf from the
fridge compartment. Slip the plastic
housing with the air filter on the left
side of the glass shelf.
5. Insert the glass shelf back in the
fridge compartment. Be careful not to
hit the filter when inserting the glass
shelf.
Replacing the CleanAir+ filter
1. Open the plastic housing.