- ページ 16

ソフトウェア Brother MFC-790CWのPDF クイック・セットアップ・マニュアルをオンラインで閲覧またはダウンロードできます。Brother MFC-790CW 44 ページ。 Quick setup guide - spanish
Brother MFC-790CW にも： (クイック設定ガイド (50 ページ)

ページを印刷する

1. Go to

USB

For USB Interface Users (For Mac OS

Before you install

Make sure your machine is connected to the

power and your Macintosh

be logged on with Administrator rights.

Important

• For Mac OS

X 10.2.0 to 10.2.3 users,

upgrade to Mac OS

the latest information for Mac OS

http://solutions.brother.com/)

• Make sure there are no memory cards or a

USB Flash memory drive inserted.

Connect the USB cable

Important

• DO NOT connect the machine to a non-

powered USB hub.

• Connect the machine directly to your

Macintosh

Using both hands, use the plastic tabs on both

sides of the machine to lift the scanner cover

until it locks securely into the open position.

is ON. You must

X 10.2.4 or greater. (For

X, visit

Macintosh

X 10.2.4 or greater)

Connect the USB cable to the USB socket

marked with a

USB socket inside the machine on the right as

shown below.

LAN

USB

Carefully guide the USB cable through the

trench as shown below, following the trench

around and toward the back of the machine.

Then connect the cable to your Macintosh

Important

Make sure that the cable does not restrict the

cover from closing, or an error may occur.

Lift the scanner cover to release the lock a.

Gently push the scanner cover support

and close the scanner cover c.

down

symbol. You will find the