- ページ 29

マザーボード Fujitsu D2860のPDF テクニカル・マニュアルをオンラインで閲覧またはダウンロードできます。Fujitsu D2860 32 ページ。 For bx920

ページを印刷する
Fujitsu D2860 テクニカル・マニュアル
Features
Switch 3 - BIOS Recovery
Switch 3 allows the system BIOS to be restored after an erroneous update. To
restore the system BIOS you need a "BIOS flashing medium" (for more infor-
mation, refer to the BIOS manual or contact the customer service team).
on
The system starts from the "BIOS flashing medium" (ODD, USB stick)
and reprograms the system BIOS on the board.
off
The system starts with the system BIOS of the system board (default
setting)
Switch 4 - TBS Override
This switch currently has no function.
TPM jumper
Figure 10: Position of the TPM jumper (TPM enable)
Pin
1
2
I
As default the jumper (1-2) is set. Without jumper the TPM function is
disabled.
D2860 (BX920)
TPM enable
Signal
TPM RESET L
ICH TMP DIS L
Technical Manual
Settings with switches and jumpers
TPM CON
Description
Reset of the TPM module
Reset of ICH10
29