- ページ 7

冷蔵庫 Indesit BIA xxx F x UKのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Indesit BIA xxx F x UK 8 ページ。 Refrigerator/freezer combination

ページを印刷する

The temperature inside the freezer compartment automatically adjusts

itself according to the position of the thermostat knob.

= warmest

= coldest

We recommend, however, a medium position.

ECO is the optimal temperature for energy saving levels.

switches the appliance off, including the refrigerator.

• Do not re-freeze food that is defrosting or that has already been

defrosted. These foods must be cooked and eaten (within 24 hours).

• Fresh food that needs to be frozen must not come into contact with

food that has already been defrosted.

• Do not place glass bottles which contain liquids, and which are

corked or hermetically sealed in the freezer because they could

break.

• The maximum quantity of food that may be frozen daily is indicated

on the plate containing the technical properties located on the

bottom left side of the refrigerator compartment (for example:

Kg/24h: 4)

• To maximise space inside the freezer, all drawers [with the

exception of the bottom drawer] can be removed from their

positions and the food placed directly on the racks/glass shelves

supplied [where present].

! Do not open the door during freezing.

! If there is a power cut or malfunction, do not open the freezer door.

This will help maintain the temperature inside the freezer, ensuring that

foods are conserved for at least 9 -14 hours.

! To avoid blocking the air circulation inside the freezer, it is advisable

not to obstruct the ventilation holes with food or containers.

!To maximise space inside the freezer, all drawers [with the exception

of the bottom drawer] can be removed from their positions and the food

placed directly on the racks/glass shelves supplied [where present].

Ice

ice tray

The fact that they are situated on the top part of the freezer drawers

ensures greater cleanliness: the ice no longer comes into contact

with the food placed inside the freezer compartment; furthermore,

the dripping of the water during filling is avoided (a lid to cover up the

hole after filling with water is also provided).

1. Pull out the tray by pushing it up. Check that the tray is ompletely

empty and fill it with water through the opening provided.

2. Take care not to exceed the level indicated (MAX WATER LEVEL).

Excess water prevents the ice cubes from dispensing (if this

happens, wait for the ice to melt and empty the tray).

3. Turn the tray 90°: due to the connected compartments each mould

fills with water (see diagram).

4. Close the opening with the lid provided and put the tray back,

placing the top part in the corresponding housing and allowing it

to drop in again.

5. When the ice has formed (minimum time approximately 8 hours)

knock the tray against a hard surface and wet the outside so that

the ice cubes come loose and take them out through the opening.

Maintenance and care

Switching the appliance off

During cleaning and maintenance it is necessary to disconnect the

appliance from the electricity supply:

1. set the FREEZER OPERATION knob on

2. pull the plug out of the socket

PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR 5 YEAR PARTS GUARANTEE ON 08448 24 24 24

Cleaning the appliance

• We recommend you clean your fridge with our Professional

Fridge cleaner.To order please call us on 08448 225 225 or

visit www.indesitservice.co.uk

• The external and internal parts, as well as the rubber seals may

be cleaned using a sponge that has been soaked in lukewarm

water and bicarbonate of soda or neutral soap. Do not use

solvents, abrasive products, bleach or ammonia.

• The removable accessories may be soaked in warm water and

soap or dishwashing liquid. Rinse and dry them carefully.

• The back of the appliance may collect dust which can be

removed by delicately using the hose of a vacuum cleaner set

on medium power. The appliance must be switched off and

the plug must be pulled out before cleaning the appliance.

Avoiding mould and unpleasant odours

• The appliance is manufactured with hygienic materials which

are odour free. In order to maintain an odour free refrigerator

and to prevent the formation of stains, food must always be

covered or sealed properly.

• If you want to switch the appliance off for an extended period

of time, clean the inside and leave the doors open.

Replacing the light bulb

• We recommend you clean your fridge with our Professional

Fridge cleaner.To order please call us on 08448 225 225 or

visit www.indesitservice.co.uk

To replace the light bulb in the refrigerator compartment, pull out

the plug from the electrical socket. Follow the instructions below.

Access the light bulb by removing the cover as indicated in the

diagram. Replace it with a similar light bulb within the power range

indicated on the cover.

Precautions and tips

! The appliance was designed and manufactured in compliance

with international safety standards. The following warnings are

provided for safety reasons and must be read carefully.

This appliance complies with the following Community Directives:

- 73/23/EEC of 19/02/73 (Low Voltage) and subsequent

amendments;

-89/336/EEC of 03.05.89 (Electromagnetic Compatibility) and

subsequent amendments;

- 2002/96/CE.

MAX

WATER LEVEL