- ページ 10

食器洗い機 Indesit DVSR 5のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Indesit DVSR 5 40 ページ。
Indesit DVSR 5 にも：取扱説明書 (20 ページ), 取扱説明書 (40 ページ), 取扱説明書 (40 ページ)

ページを印刷する

Refined Salt and Rinse Aid

Only use products which have been specifically designed

for dishwashers. Do not use table salt or industrial salt.

Follow the instructions given on the packaging.

If you are using a multi-function product, we recommend

that you add salt in any case, especially if the water is hard

or very hard.

If you do not add salt or rinse aid, the LOW SALT

LOW RINSE AID

indicator lights will remain lit.

Measuring out the refined salt

The salt dispenser is located in the lower part of the dishwasher

and should be filled:

is lit

;

longer visible.

1. Remove the lower rack and unscrew the

2. Only the first time you do this: fill the water

dispenser up to the edge.

3. Position the funnel

fill the salt container right up to its edge

4. Remove the funnel and wipe any salt residue away from the

opening; rinse the cap under running water and then screw it on.

It is advisable to perform this procedure every time you add salt

to the container.

Whenever you need to add salt, we recommend carrying out

the procedure before the washing cycle is started.

Setting the water hardness

For perfect water softener operation, it is essential that the

adjustment be based on the water hardness in your house. Ask

your local water supplier for this information. The factory setting

is for medium water hardness.

on the cap of the salt dispenser is no

for 5 seconds.

Water Hardness Table

level

°dH

and

Measuring out the rinse aid

should be filled:

;

is lit

becomes transparent.

and

NEVER pour the rinse aid directly into the tub.

Adjusting the amount of rinse aid

If you are not completely satisfied with the drying results, you

A maximum of 4 levels can be set according to the dishwasher

model. The factory setting is for a medium level.

Only available in selected models.

Average autonomy

salt dispenser with 1

wash cycle per day

°fH

mmol/l

months

1. Open the dispenser by turning

the cap "G" in an anticlockwise

direction.

2. Pour in the rinse aid, making

sure it does not overflow from the

dispenser. If this happens, clean

the spill immediately with a dry

cloth.

3. Screw the cap back on.

"E"

"F".