- ページ 15

食器洗い機 Indesit LFT 321 HXUKのPDF サービスマニュアルをオンラインで閲覧またはダウンロードできます。Indesit LFT 321 HXUK 26 ページ。

Turbine Litre-count

As on Model EVO3, it serves to check the quantity of water that enters the machine. The information in turn is assessed by the

pressostat.

Every 270 impulses emmitted by the turbine, are equivalent to a litre of water. This calibration has approximately a 2% tollerance

margin. When the water-pressure is less than 1 bar, the tollerance-margin is 6%.

NB: Should the pressure be less than 0,5 Bar, the turbine reading-detector may not function correctly.

The Regenerating Solenoid-valvc:

It has been fixed onto the sweetener and serves to allow the water to flow in through a salt-container which will turn it into salt-

water used in turn, to regenerate the resines.

The Pressostat:

Even though it is similar to the one on the EVO3 model, it has different calibrations and therefore it's not interchangeable.

The Pressostat Pump:

Suitable hooks have been made with the purpose of keeping the pressostat-pump well-fixed, to prevent either fom falling or from

filling up with water.

It must not be mounted tightly.

Plug and noise-proof filter:

Two types of electric-plugs are available: one is for the European market and the other is for the U.K-market.

Two types of filters are also available: one is for the synchro-motor and the other for the BLDC-motor: consequently, there are

four different types of spare-part codes.

Cable:

The cable is specific to each type of dishwasher and may be obtained in pieces from the spare-part warehouses (as is the case

in washing-machines and EVO2).

Water-Collector:

As compared to EVO3, the basin on this model instead is fixed directly onto the basin by means of 4 screws. It serves to "host"

other components as for example: the discharging-pump, unclean-water sensor, Discharging-pipe, Alternate Washing-motor,

NTC, Air-break.

Sensor for Unclean Water:

Even though it appears to be different, its functions are similar to thoseon model EVO3 i.e. The capacity of understanding to what

extent the dishes are dirty and hence the programme to select. It has been placed in the water-collector and is in direct contact

with the water.

The Spoiler and Water-Deviator:

Serves to supervise over the process of water-suction during the washing-cycle, thus preventing the motor to function without

water as well as using glass-filters in all the filtering area.

Service Manual

Manual LFT 228-320 - 321

Edition

2007.10.15

Language

English