- ページ 18

換気フード AEG DE 6261のPDF 操作および設置マニュアルをオンラインで閲覧またはダウンロードできます。AEG DE 6261 21 ページ。

Fixing the hood

• Use template N2. Position the template on the front edges of the

wall unit (right wall unit, B side) – (left wall unit, C side) WITHOUT

CONSIDERING THE THICKNESS OF THE FRONT WALL UNIT

DOORS, and make the holes as indicated. Fig. 11

• If the side wall units are not heavy enough ONLY:

a. If necessary, fix the hood to the wall, putting template N1 on the

wall so its upper edge coincides with the upper edge of template

N2. Fig. 11-12

b. Make the holes as indicated.

Fix 2 hooks R to the wall with screws and dowels. Fig. 12

c. Hang the hood onto the hooks and adjust the position of the

hood with headless screws S1 and adjusting the position of the

hooking brackets with screws S2. Fig. 12

• Fix the hood to the side wall units with 4 screws P. Fig. 11

• Mount the lower corner Q (*) to the hood with two screws and

plastic washers T. They will serve to cover possible spaces between

the rear of the hood and the wall. Fig. 11-12

• Fit the grille.

Fig. 11

Fig. 12