ページを印刷する
Problem
After a steam programme, there are wet
spots on clothes.
Even after several drying cycle the steam
water tank is empty.
The appliance door does not close.
The appliance stops during operation.
The cycle time is too long or unsatisfactory
1)
drying result.
Possible solution
Remove clothes quickly one at a time from
the machine as soon as possible after the
start of the anticrease phase.
Hang clothes on clothes hangers, do up but‐
tons and tug clothes into shape.
Reshape multilayered clothes by ironing af‐
ter they come out of the machine.
Incorrect steam level selection. Set suitable
steam level (see steam guide for reference).
Clean the filter (see chapter
CLEANING ) before performing the steam
cycle.
Clean the steam water filter.
Make sure that the installation of the filter is
correct.
Make sure that the laundry is not caught be‐
tween the appliance door and the rubber
seal.
Make sure that the water container is emp‐
ty. Press Start/Pause to start the pro‐
gramme again.
Load is too small, increase the load or use
the Time Dry programme.
Make sure that the weight of the laundry is
suitable for the duration of the programme.
Make sure that the filter is clean.
The laundry is too wet. Spin the laundry in
the washing machine again.
Ensure that the room temperature is higher
than +5°C and lower than +35°C. Optimal
room temperature is 18°C to 25°C.
Set the Time Dry or the extra dry pro‐
2)
gramme.
ENGLISH
35
CARE AND