- ページ 8

バスタブ Kohler K-11344のPDF インストレーション＆ケア・マニュアルをオンラインで閲覧またはダウンロードできます。Kohler K-11344 28 ページ。 Freestanding bath
Kohler K-11344 にも：インストレーション＆ケア・マニュアル (45 ページ), インストレーション・マニュアル (25 ページ), ラフイン・マニュアル (4 ページ)

7. Secure the Bath

Turn the bath shell upside down on the saw horses.

Make sure all the drain connections are secure.

Position the shroud on the bath so the edges of the shroud rest inside the bath shell.

Secure the shroud to the bath with a screw at each corner. Do not overtighten.

Make sure the foot clips are not in the locked position.

Carefully lift the bath into position so the posts on the bath frame ﬁt into the four foot clips, and the

drain tailpiece ﬁts into the drain pipe.

Check for solid ﬁt (no rocking) and a 24-1/8" (613 mm) rim corner height to the ﬁnished ﬂoor.

Lift and move the bath if needed, and adjust the four posts as needed to ensure a distance of

24-1/8" (613 mm) from the ﬁnished ﬂoor to the top of each bath rim corner. Adjust the bath levelers

as needed. Make sure the bath levelers and bath feet are tight.

Press down on the bath corners with your hand to make sure the bath does not move up and down,

or side to side. If the bath moves check that all four posts are inside the foot clips, and check that

the ﬂoor is level.

Use a ﬂat-bladed screwdriver to push in the four locking plates to lock the bath feet in place.

8. Complete the Installation

Secure the drain tailpiece to the drain pipe.

Install the bath faucet according to the instructions included with the faucet.

Run water into the bath and check the drain connections for leakage.

1207307-2-B

24-1/8"

(613 mm)

Post

Bath

Leveler

Kohler Co.