- ページ 21

トイレ Kohler ESCALE K-25449T-NSのPDF 取付説明書をオンラインで閲覧またはダウンロードできます。Kohler ESCALE K-25449T-NS 28 ページ。 Floor standing toilet

Installation For In-wall Tank Without Frame

A. Installation of In-wall Tank

1. Remove in-wall tank from packing box. Remove front cover

board or top cover board inside water tank first as shown.

Then remove paper board, support block and plug above

bracket assembly.

2. Make sure of h according to dimensions of bowl and then

locate the installation hole of fixing bracket. Mark on the

wall for appropriate position for fixing bracket, and drill four

holes with diameter of 12mm and depth of 80mm with

churn drilling as shown in illustration, and fill in the holes

with expanding bolt cap and tighten the screw to set the

fixing bracket.

Note: Ensure the fixing bracket to remain level.

12mm

80mm

3. Put the tank onto the fixing bracket as shown in the right

figure and adjust the tank to level .

Note:

it is a must to keep the tank level.

1402749-T01-A

-15-

Cover,Top

Plug

Cover,Front

Supporting Board

Paper Board

Cover,Front

Expanding

Bolt Cap

Z-connecting Plate

Screw

Washer

Level

Tank