- ページ 16

エンジン Kohler Command PRO CH730のPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Kohler Command PRO CH730 21 ページ。 Liquefi ed petroleum gas (lpg) or lpg/natural gas (ng) fueled
Kohler Command PRO CH730 にも：オーナーズマニュアル (21 ページ), オーナーズマニュアル (21 ページ), オーナーズマニュアル (8 ページ), オーナーズマニュアル (21 ページ), オーナーズマニュアル (12 ページ), オーナーズマニュアル (14 ページ), オーナーズマニュアル (8 ページ)

ページを印刷する

Storage

If the engine will be out of service for two months or

more, use the following storage procedure:

Clean the exterior surfaces of the engine. On EFI

engines, avoid spraying water at the wiring

harness or any of the electrical components.

Change the oil and filter while the engine is still

warm from operation. See "Change Oil and Oil

Filter" on page 9.

The fuel system must be completely emptied, or

the gasoline must be treated with a stabilizer to

prevent deterioration. If you choose to use a

stabilizer, follow the manufacturers

recommendations, and add the correct amount for

the capacity of the fuel system. Fill the fuel tank

with clean, fresh gasoline. Run the engine for 2-3

minutes to get stabilized fuel into the rest of the

system. Close fuel shut-off valve when unit is

being stored or transported.

To empty the system, run the engine until the tank

and system are empty.

Remove the spark plugs. Add one tablespoon of

engine oil into each spark plug hole. Install the

plugs, but do not connect the plug leads. Crank

the engine two or three revolutions.

Store the engine in a clean, dry place.

Parts Ordering

The engine Specification, Model, and Serial Numbers

are required when ordering replacement parts from

your Kohler Engine Service Dealer. These numbers are

found on the identification plate which is affixed to the

engine shrouding. Include letter suffixes if there are

any. See "Engine Identification Numbers" on page 6.

Always insist on genuine Kohler parts. All genuine

Kohler parts meet strict standards for fit, reliability, and

performance.

Major Repair

Major repair information is available in Kohler Engine

Service Manuals. However, major repair generally

requires the attention of a trained mechanic and the

use of special tools and equipment. Your Kohler

Engine Service Dealer has the facilities, training, and

genuine Kohler replacement parts necessary to

perform this service. For Sales & Service assistance

call 1-800-544-2444

(U.S. &

Canada) or contact your

Kohler Engine Dealer or Service Distributor, they're in

the Yellow Pages under Engines-Gasoline.

Specifications

Model: .........................................................................

CH18,20,22

...........................................

CH25,26,730,740

Bore: ......................................

rnrn

(in.) ......................

77 (3.03)#

...............................................

83 (3.27)

Stroke: ....................................

rnrn

(in.) ......................

67 (2.64)

................................................

67 (2.64)

Displacement: ........................

cm3

(in3) ......................

624 (38.1)#

.............................................

725 (44.0)

Power (Q3600 RPM): ..........

(HP) ......................

13.4 (18*)/14.9 (20*)/16.4 (22*)

............

18.4 (25*)/19.4 (26)

18.6 (25*)/20.1 (27)

Max.

Torque

( Q RPM):

......... N.rn

(ft. Ib.)

......................

41 (30) Q2500

........................................

(39.5) Q2200

44 (32) Q2500

........................................

56.4 (41.6) Q2200

45 (33) Q2500

........................................

52 (38) Q2800

54 (40) Q2800

Compression Ratio: ....................................................

8.51

......................................................

9.O:l

Weight: ....................................

kg (Ib.) ......................

41 (90)

...................................................

43 (94)

Oil Capacity (w/filter): ........

L (U.S.

qt.) ......................

2 (2.1)

....................................................

2 (2.1)

Lubrication: ..........................................

Full Pressure w/full Flow Filter

Exhaust Emission Control System

for

models

CH18,20,22,23,25,730,740

is EM.

Exhaust Emission Control System

for

model

CH26

EM, 02S,

ECM, MFI.

*Horsepower ratings are established in accordance with Society

Automotive Engineers

Small Engine

Test

Code

4 1 995

GROSS.

Kohler Co. reserves the right

change product specifications, design, and standard equipment without notice and

without incurring obligation.

#CH22 or CH23

engines with Spec. Numbers

of 765xx

have bore size

of 80 rnrn (3.15

in.) and displacement

of 674 cm3

(41.1

in3).