- ページ 11

照明器具 Avlite AV-OL-CMIのPDF インストレーション＆サービスマニュアルをオンラインで閲覧またはダウンロードできます。Avlite AV-OL-CMI 20 ページ。 Combined medium intensity obstruction light

7.0 Unpacking, Installation and Wiring



Unpack all hardware and inspect for damage. If there is any damage, please contact your Avlite Office.

Retain original packing material for possible future use in shipping.

Mount the CMI fixture directly to the top of the tower or installation structure by either securing it to the mounting

plate or by attaching an optional Avlite Right Angle Pole Mounting Bracket (for medium intensity fixtures) to the tower

and bolting the CMI to the bracket. The obstruction light is manufactured with an input power cable of length defined

at the time of order. One end of the input power cable is pre-terminated at the light fixture.

Connect the provided input power cable to the corresponding power source in accordance with the DC wiring

diagrams shown on the following pages.

Note: Make sure the mounting pole is vertically aligned to guarantee the required beam pattern of the obstruction

light. Make sure the light's beam pattern is not disturbed by any nearby obstacles

WARNING:

DO NOT connect directly to an unregulated power source. Connecting to an unregu-

lated source may result in damage.

WARNING:

Do not stare into light emitting diode (LED) beams.

WARNING:

LED lights contain glass components. Do Not Drop.

Always follow the instructions outlined in the product manual when cleaning the

equipment. Improper cleaning methods and use of unauthorized cleaning agents

can damage equipment.

Want the latest product information?

Visit