- ページ 15

浄水器 Aqua Exclusive DRUM FILTER C-25 EVOのPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Aqua Exclusive DRUM FILTER C-25 EVO 20 ページ。

Installing the Rinse Pump

•

It is important, however, that high-pressure hose/PVC pipe is used for this purpose.

•

The pump generates a pressure of 3 bar. Pressure peaks of 4 bar may occur during start-

up. Therefore do not use sewer & drain PVC.

•

The high-pressure pump itself must be placed in a moisture-free location below the water

level.

1. Place a flexible tee coupling (2) at the output (1) of the filter. One output of the tee cou-

pling is for the rinse pump (7) and the other serves as a passage to the pond pump.

2. Connect the output of the tee coupling to the rinse pump (7) and the rinse pump to the

spray tube (5).

Figure 9: Overview of the C-25 EVO with a rinse pump.

1. Filter outlet 4" (110mm)

2. Flexible Rubber Tee Coupling 4" (110mm)

3. PVC Reducer ring

4. Hose/PVC pipe to Rinse Pump Inlet

5. Spray Bar

6. Hose/PVC pipe from Rinse Pump Outlet to Spray Bar

7. Rinse Pump

Installation

Rinse Pump

Aqua Exclusive