- ページ 11

カーエレクトロニクス AVS AVS S3のPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。AVS AVS S3 17 ページ。 S-series car alarm range
AVS AVS S3 にも：オーナーズマニュアル (9 ページ), オーナーズマニュアル (10 ページ)

ページを印刷する

COuRIER FuNCTION

Courier function allows the engine to continue running indefinitely

while the system is armed. For more information talk with your AVS

installer.

1. Leave the key on in the ignition with the car running and exit the

vehicle. Make sure the doors, bonnet and boot are shut.

2. Push the

The engine will continue to run. After 3 seconds the LED starts

Glass Break Sensor

flashing to indicate the alarm is armed.

3. If the alarm detects an intrusion the alarm will immobilise the

engine and the siren will sound (AVS S5/S4).

4. Upon returning to the vehicle push the

remote to disarm the alarm as normal. The alarm will disarm and

the doors unlock (if optional central locking installed) allowing

you to enter the car and drive away.

ANTI HI-jACk

This feature is designed to help prevent car theft through car

jacking or theft of the keys and alarm remote by utilising a covert

switch. There are two anti hi-jack options:

1. If a car door is opened while the ignition is on a covert switch

needs to be pressed within one minute or the alarm will sound

and the car will be immobilised.

2. Any time the ignition is turned on the covert switch needs to be

pressed within one minute to cancel anti-hijack mode.

With either option if the covert button is not pressed within one

minute the vehicle will enter anti-hijack mode. The alarm will sound

and the fuel pump immobiliser will engage, shutting the engine off.

To exit anti-hijack mode turn the ignition OFF then back to ON

and press the covert switch. Alternatively enter your PIN code. The

alarm will disarm and exit anti-hijack mode.

Learn more at

avscarsecurity.com

button on the remote to arm the alarm as normal.

button on the

or talk with your AVS installer.