- ページ 12

スクラバー Abatement Technologies HEPA-AIRE PAS600のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Abatement Technologies HEPA-AIRE PAS600 17 ページ。 Portable air scrubber

ページを印刷する

PAS600 SPECIFICATIONS

FEATURE

Net weight with filters:

Shipping weight:

Unit dimensions:

Power supply requirements:

Normal operating amps:

Integrated circuit breaker:

Motorized impeller:

Operating flow rate* (with clean filters):

Operational sound level:

Cabinet:

Transportability:

Stackability:

Pre-filter access:

First stage pre-filter:

Second stage pre-filter:

Alternate second stage pre-filter:

HEPA filter:

Note: Specifications subject to change without notice.

*Airflow rating estimates are based on factory testing at 120 VAC, 60 Hz with an air straightener and a traverse

of readings taken with a computing vane-anemometer. Actual results may vary for various reasons, including

motor and blower and HEPA filter tolerances. Factors such as filter loading, reduced voltage to the motor, and

inlet and outlet ducting will reduce airflow. Use the ratings as a general guideline only.

SPECIFICATIONS

33.5 lbs.

42.5 lbs.

23.75" L x 18" W x 17.5" H

Minimum

120 VAC, 60 Hz, 15 A

1.9 amps or less

12 amps

225 watt motorized impeller with thermal overload protection, auto

re-set, 60 Hz, single phase.

Variable, 200 – 600 CFM

62 – 67 dBA on high speed, reading taken at 5'.

.050 anodized aluminum, assembled with solid rivets. Seams

are gasketed.

Carrying handles on top of unit.

The 4 plastic guides on top panel and 4 rubber feet on bottom

panel enable up to 3 units to be stacked.

Swing out hinged door secured in place with cam latch.

1" deep coarse particulate pre-filter (P/N: F621).

2" deep pleated particulate pre-filter (P/N: H502).

2" deep high capacity carbon filter for odors (P/N: VL1002).

HEPA mini-pleat filter with continuous seamless gasket, tested

and certified to an efficiency of 99.97% or higher against 0.3

micron size particles (P/N: H161606-99).