- ページ 13

ノートパソコン Dell 2000のPDF セットアップマニュアルをオンラインで閲覧またはダウンロードできます。Dell 2000 18 ページ。 Setup guide
Dell 2000 にも：セットアップと機能情報 (8 ページ)

NOTE: If the Add New Hardware Wizard screen appears, click Cancel.

Go to the next section, "Installing Software for a Printer."

NOTE: Dell installs the software for some new printers. To determine if your printer's

software is already installed, click the Start button, point to Settings, and then click

Printers. If your printer is listed in the Printers window, the printer is ready to use; no

software installation is required.

Most new printers provide installation CDs that run automatically when inserted in the

CD-ROM or DVD-ROM drive. Install the software for these printers by inserting the

CD and following the prompts on your screen using the instructions that came with

the printer. It is not necessary to use the Printer Wizard to install these types of

printers.

If your printer's installation CD does not automatically run, click the Start button, click

Run, and type , where is the letter of your CD-ROM or DVD-ROM

drive (typically drive D). Then click OK, and follow the prompts on your screen.

NOTE: If you are adding an older printer and the printer does not respond after you

install the software, make sure that the system's parallel port is set to operate in

bidirectional mode in the system setup program. See Appendix B, "System Setup

Program," in your system's Reference and Troubleshooting Guide for instructions.

USB connector on

computer

USB printer

cable

Using Hardware Devices

USB connector on

printer

3-3