- ページ 10

産業機器 ABB 1600481709AのPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。ABB 1600481709A 13 ページ。 Edge ac short circuit current limiter

QUICK START GUIDE

Step 3. Assemble EDGECABG391 to cabinet

Assemble the base panel assembly to the top of the

cabinet using the 8 #6-32 screws provided.

Torque to 10in-lb. (Nm)

2. Pull the wires that were previously connected to the

twist-n-lock receptacles (Step 2, 2) through the two

grommeted holes in the base panel and terminate to

the fuse blocks. The fuse blocks are labeled A and B.

Attach the wires removed from the A receptacle to

the fuse block labeled A. Repeat for the B block. Each

fuse position is labeled L1, L2, or L3. Terminate red

wire to L1, black wire to L2, and blue wire to L3.

Torque to 25in-lb.

Note: Cover is hidden in figure 8 and figure 9 to show the screw locations and wiring clearly. During assembly the

cover does not need to be removed.

Page 10

Screws

Edge_Ilim_G391_QSG

Screws

Version. 2.0