ページを印刷する
System information label
Figure 6. Mechanical overview, System tasks
Figure 7. System tasks, Sled installation guide
Rail sizing and rack compatibility matrix
For specific information about the rail solutions compatible with your system, see the Dell Enterprise Systems Rail
Sizing and Rack Compatibility Matrix available at
https://i.dell.com/sites/csdocuments/Business_solutions_engineering-
Docs_Documents/en/rail-rack-matrix.pdf.
The document provides the information that is listed below:
● Specific details about rail types and their functionalities.
● Rail adjustability range for various types of rack mounting flanges.
● Rail depth with and without cable management accessories.
● Types of racks that are supported for various types of rack mounting flanges.
Key factors governing proper rail selection include the following:
● Spacing between the front and rear mounting flanges of the rack.
● Type and location of any equipment that is mounted in the back of the rack such as power distribution units (PDUs).
● Overall depth of the rack.
The static rails offer a greater adjustability range and a smaller overall mounting footprint than the sliding rails because of their
reduced complexity and lack of need for CMA support. The static rails support a wider variety of racks than the sliding rails.
However, they do not support serviceability in the rack and are thus not compatible with the CMA. The static rails are also not
compatible with SRB.
Figure 8. Static rails
10
Dell PowerEdge XR8000r system configurations and features