- ページ 17

サーバー Dell EqualLogic PS5000のPDF ハードウェアマニュアルをオンラインで閲覧またはダウンロードできます。Dell EqualLogic PS5000 50 ページ。 Storage arrays
Dell EqualLogic PS5000 にも：ハードウェア・メンテナンス (46 ページ)

ページを印刷する

1. Table of Contents
2. Introduction
3. Network Configuration Recommendations
4. Power Supplies Cabling Information
5. Installation Overview
6. Troubleshooting

NOTE: You can use only one of the two 10 Gb Ethernet ports on each control module at a time. With the 10GBASE-T

port (left Ethernet 0 port), use CAT6 or better cable. With the SFP+ port (right Ethernet 0 port), use fiber optic cable

acceptable for 10GBASE-SR or twinax cable.

For more information, see the figures below.

Figure 7. Cabling an iSCSI SAN-Attached Cluster to a Dell EqualLogic PS4110 Storage Array

1. cluster node 1

2. cluster node 2

3. switch 0

4. switch 1

Figure 8. Cabling an iSCSI SAN-Attached Cluster to a Dell EqualLogic PS6110 Storage Array

5. Dell EqualLogic PS4110 storage system

6. control module 0

7. control module 1