- ページ 26

サーバー Dell Force10 S2410-01-10GE-24PのPDF マニュアルをオンラインで閲覧またはダウンロードできます。Dell Force10 S2410-01-10GE-24P 42 ページ。 Installing the s2410 system
Dell Force10 S2410-01-10GE-24P にも：アプリケーションノート (6 ページ), クイック・スタート・マニュアル (31 ページ)

ページを印刷する

1. Physical Interfaces

Step

Task

Figure 5-3. XFP

Insert the XFP gently into the port until it snaps into place. (The design of the XFP prevents it from seating

incorrectly.)

The XFP transceiver contains Rx and Tx labels on the two fiber optic connections, and the connections have

keyways that prevent inserting the cables incorrectly.

CAUTION: Before connecting a transceiver to a source, check the receive power of the transceiver with an

optical power meter. Generally, Dell Force10 specified optics are not to be subjected to receive power higher

than that stipulated by the optic specification. If the optic is exposed to optical power in excess of the

specification, there is a high likelihood that it will be damaged.

Optical specifications for Dell Force10 branded devices are at the following URL:

http://www.force10networks.com/products/mediaspecifications.asp

Accessing Ports

Position the XFP so it is in the upright position (XFPs on the bottom

(even-numbered ports) are upside down; odd-numbered ports (on top)

install right-side up), with the bail latch on top in the closed position, as

shown here.

For details on XFP installation, see the instruction that accompanies the

XFP.