- ページ 14

サーバー Dell PowerConnect M8428-kのPDF マニュアルをオンラインで閲覧またはダウンロードできます。Dell PowerConnect M8428-k 25 ページ。 Dell poweredge m710 and m710hd - system memory update
Dell PowerConnect M8428-k にも：更新マニュアル (32 ページ), リリースノート (27 ページ), ユーザーマニュアル (23 ページ), 更新マニュアル (1 ページ)

ページを印刷する

Rev 1.00

Table 5 - List of Commands

Command

name

set port test

show port link

show port module Shows uplink module parameters

show port test

Debug Commands

cr_read

cr_write

3.3

CLI Command Reference Conventions

This section describes the PTM CLI commands.

For each command, the following information is provided:

• Synopsys:

Lists the command name and any required or optional parameters. Variable parameters (like port

numbers) are shown in italics. Optional parameters are shown in square brackets, e.g.

[optional_parameter]. Required parameters are shown with no brackets.

• Description:

Provides a detailed description of the command and of all its parameters

• Example:

Usage example and command output.

• For purpose of automation, the symbol '#' is used to indicate a comment that extends until the

next new-line character.

3.4

General Commands

3.4.1 help

Synopsys:

help

Short Description

Sets port test mode attributes

Shows port link state

Shows ports test mode status

To read a 32 bit register from device num-

ber device_num.

To write a data_dword to address

0xHex_address to device number

device_num.

Reference

Section 3.7.1, "set port test

(ADMIN)," on page 18

Section 3.7.2, "show port link," on

page 18

Section 3.7.3, "show port module," on

page 19

Section 3.7.4, "show port test

(ADMIN)," on page 20

Section 3.8.1, "cr_read (ADMIN)," on

page 20

Section 3.8.2, "cr_write (ADMIN),"

on page 20

Software User's Manual