- ページ 11
サーバー Dell PowerEdge 830のPDF システムユーザーズマニュアルをオンラインで閲覧またはダウンロードできます。Dell PowerEdge 830 22 ページ。 Upgrade the bios before upgrading your system (.pdf)
Dell PowerEdge 830 にも： 設置およびトラブルシューティング・マニュアル (14 ページ)
ページを印刷するIntegrated
See
"Integrated Devices
Devices
PCI IRQ
Displays a screen to change the IRQ assigned to each of the integrated devices on the PCI bus, and any installed expansion cards that
Assignment
require an IRQ.
Console
See
"Console Redirection
Redirection
System Security
Displays a screen to configure the system password and setup password features. See
Setup
Password" for more information.
Keyboard
Determines whether your system starts up with the NumLock mode activated on 101- or 102-key keyboards (does not apply to 84-key
NumLock
keyboards).
(On default)
Report Keyboard
Enables or disables reporting of keyboard errors during the POST. Select Report for host systems that have keyboards attached. Select
Errors
Do Not Report to suppress all error messages relating to the keyboard or keyboard controller during POST. This setting does not affect
(Report default)
the operation of the keyboard itself if a keyboard is attached to the system.
Asset Tag
Displays the customer-programmable asset tag number for the system if an asset tag number has been assigned.
CPU Information Screen
Table 2-3
lists the options and descriptions for the information fields that appear on the CPU Information screen.
Table 2-3. CPU Information Screen
Option
Description
Bus Speed
Displays the bus speed of the processors.
Logical Processor
Displays when the processors support Hyper-Threading technology. Enabled permits all logical processors to be used by the
(Enabled default)
operating system. Only the first logical processor of each processor installed in the system is used by the operating system if
Disabled is selected.
Demand-Based Power
When set to Enabled, the CPU Performance State Tables are reported to the operating system. When set to Disabled, the
Management
Performance State Tables are not reported to the operating system.
(Disabled default)
If the processor does not support Demand-Based Power Management, this field is read-only.
Processor 1 ID
Displays the family and model number of each processor.
Core Speed
Displays the clock speed of the processor(s).
Level 2 Cache
Displays the amount of cache memory for the processor.
64-bit Technology
Specifies if the installed processor supports Intel® 64-bit extensions.
Integrated Devices Screen
Table 2-4
lists the options and descriptions for the information fields that appear on the Integrated Devices screen.
Table 2-4. Integrated Devices Screen Options
Option
Description
Diskette Controller
Enables or disables the system's diskette drive controller. When Auto is selected, the system turns off the controller when necessary to
(Auto default)
accommodate a controller card installed in an expansion slot. You can also configure the drive as read-only. When using the read-only
setting, the drive cannot be used to write to a disk.
IDE Controller
Enables the integrated IDE controller. When set to Auto, each channel of the integrated IDE controller is enabled if IDE devices are
(Auto default)
attached to the channel and the external IDE controller is not detected.
SATA Controller
Allows the integrated SATA controller to be set to Off or ATA Mode. Off disables the SATA subsystem. ATA Mode sets the SATA
(ATA default)
subsystem to Native IDE mode.
USB Controller
Enables or disables the system's USB ports. Options are On with BIOS support, On without BIOS support, or Off. Disabling the USB
(On with BIOS
ports makes system resources available for other devices.
support default)
Embedded Gb NIC
Enables or disables the system's integrated NIC. Options are Enabled without PXE, Enabled with PXE, and Disabled. PXE support
(Enabled with PXE
allows the system to boot from the network. Changes take effect after the system reboots.
default)
MAC Address
Displays the MAC address for the integrated 10/100/1000 NIC. This field does not have user-selectable settings.
Serial Port
Serial Port 1 options are COM1, COM3, BMC Serial, BMC NIC, and Off. If an optional remote access controller (RAC) is installed in the
(COM1 default)
system, RAC is an additional option.
Serial port 1 shares three usage models. For standard usage, serial port 1 attempts to use COM1 first, and then COM3. For BMC usage,
serial port 1 uses the COM1 address and communication can be either via the Serial port or the integrated shared NIC. RAC control uses
only the COM1 address.
NOTE:
Off and COM3 are not available options when Console Redirection is set to use Serial Port 1.
Speaker
Enables or disables the system internal speaker.
(On default)
Screen."
Screen."
"Using the System
Password" and
"Using the