- ページ 9
防犯カメラ Avue AU-G50VL-WB36WDのPDF 操作マニュアルをオンラインで閲覧またはダウンロードできます。Avue AU-G50VL-WB36WD 17 ページ。 High-speed outdoor ptz camera series
ページを印刷するOSD
System Setting
Clear
CLEAR
-------------------------------
CLEAR ALL ZONES
CLEAR ALL PRESET
CLEAR ALL PATTERNS
CLEAR ALL TOURS
CLEAR ALL WINDOWS
FACTORY DEFAULTS
RESTART
BACK
EXIT
System Setting
Password Setting
PASSWORD SETTING
---------------------------------
OLD PASSWORD ******
NEW PASSWORD ******
CONF PASSWORD ******
ENABLE PASSWORD OFF
BACK
EXIT
System Setting
Clock Setting
CLOCK SETTING
--------------------------------
TIME:
HH:MM:SS
DATE:
YY/MM/DD
BACK
EXIT
Camera Setting
CAMERA SETTING
---------------------------------------
ZOOM SPEED
HIGH
DIGITAL ZOOM
ON
BLC MODE
OFF
SLOW SHUTTER
OFF
LINE SYNC
N/A
WDR MODE
N/A
→
ADVANCE SETTING 1
→
ADVANCE SETTING 2
BACK
EXIT
Camera Setting
ADVANCE SETTING 1
IR CUT FILTER
--------------------------------------
IR CUT FILTER
COLOR
IR CUT ON TIME
N/A
IR CUT OFF TIME
N/A
MAX GAIN
28dB
BACK
EXIT
Camera Setting
Advanced Setting
ADVANCE SETTING
---------------------------------------
→
AE MODE
AUTO
SHUTTER
N/A
IRIS
N/A
BRUGHT
N/A
WB MODE
AUTO
R GAIN
N/A
B GAIN
N/A
HI RESOLUTION
ON
BACK
EXIT
The "CLEAR" function resets the settings to factory default.
CLEAR ALL ZONES:
Delete all zones setting
CLEAR ALL PRESET:
Delete all preset positions
CLEAR ALL PATTERNS:
Delete all pattern setting
CLEAR ALL TOURS:
Delete all tours setting
CLEAR ALL WINDOWS:
Delete all privacy masking setting
FACTORY DEFAULT:
Reset all setting and return to factory settings
RESTART:
Restart the dome
Note: after using the option "Factory default", all system setting and stored information such as preset, tour or pattern will be
erased permanently. Please make sure of using this function before proceeding.
The password function can prevent unauthorized access to the OSD and change the setting. It consists a 6 digit number
from 0-9 and can be disable.
OLD PASSWORD:
Enter the old password
NEW PASSWORD
: Enter the new password with 6 digit number
CONF PASSWORD:
Enter the new passwor again
ENABLE PASSWORD: Activate the login function to the OSD
Default password: 000000
Supervisor password: 892226
The system is equipped with a RTC (Real-Time Clock) and can be used to display the date/ time information on the
screen, or schedule enabled operation. In order to use these functions correctly, you need to setup at first.
TIME:
Change the time setting
DATE:
Change the date setting
Use [LEFT], [RIGHT] to move the cursor and use [UP], [DOWN] to adjust the value. When finished, press [IRIS OPEN] to
save the setting.
Zoom Speed:
Define the Zoom speed. Selectable: LOW/HIGH
Digital Zoom:
Activate digital zoom, depend on Modul
BLC MODE:
Back-Light Compensation mode. Use this option when the observed object has a strong
back-light such as the sun light or other light source.
SLOW SHUTTER:
The slow-shutter allows a higher sensitivity by exposing the image sensor with a longer period of time,
incase the observed objects does not have much movement.
WDR MODE:
Activate Wild Dymamic Range, depend on Modul
Note: This function is only available for models with Day/Night ability. please contact your local dealer in case of doubt.
IR CUTTER:
Enables the removal of Infrared Cutter Filter (IRC), also known as "DAY/NIGHT" mode.
- Color Mode: remains in the day mode
- Black: IRC remains in night mode.
- TIME: Controlled by the time schedule.
IR CUT ON TIME:
When the IR Cutter should turn on, given in day time.
IR CUT OFF TIME:
When the IR Cutter should turn off, given in day time.
MAX GAIN:
improve the image quality in the Night modus
Note: This function is only available for models with Day/Night ability. please contact your local dealer in case of doubt.
ADVANCED SETTING:
Enters the advenced setting module for the camera setting
AE MODE:
Auto-Exopsure mode. This camera supports various exposure methods for different environment:
SHUTTER MODE:
In shutter mode, the camea changes the shutter speed to regulate light.
IRIS MODE:
Regulate the Iris-openning to control the exposure
BRIGHTNESS:
Regulates the exposure by changing the brightness control
AUTO:
Automatically regulates the exposure modes.
WB MODE:
The camea supports ATW, Indoor and Outdoor mode of White balance, which chooses the correct color of the
image.
R-Gain:
Regulates the red elements in the image color
B-Gain:
Regulates the blue elements in the image color
High-Resolution:
Turns the High-Resolution mode of the camera. only available on supported
camera models.
English
6