- ページ 22

モニター Dell E198FPのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Dell E198FP 36 ページ。 Dell e198fp: quick start
Dell E198FP にも：セットアップマニュアル (2 ページ)

ページを印刷する

Back to Contents Page

Setting Up Your Monitor

Dell™ E198FP Flat Panel Monitor

Connecting Your Monitor

Using the Front Panel Buttons

Using the OSD

Using the Dell Soundbar (Optional)

Connecting Your Monitor

CAUTION:

Before you begin any of the procedures in this section, follow the

1. Turn off your computer and unplug its power cable.

2. Connect the blue (analog D-sub) display connector cable to the corresponding video port on the back of your computer. (The graphic is for illustration

only. System appearance may vary).

3. Connect the power cable for your display to the power port on the back of the display.

4. Plug the power cables of your computer and your display into a nearby outlet. Your monitor is equipped with an automatic power supply for a voltage

range from 100 to 240 Volt at a frequency of 50/60 Hz. Be sure that your local power is within the supported range. If you are unsure, ask your

electricity supplier.

5. Turn on your display and computer.

If your monitor displays an image, installation is complete. If it does not display an image, see Troubleshooting.

Using the Front Panel Buttons

Use the control buttons on the front of the monitor to adjust the characteristics of the image being displayed. As you use these buttons to adjust the controls,

an OSD shows their numeric values as they change.

Downloaded from ManualMonitor.com Manuals

Safety

Instructions.