- ページ 24

モニター Dell E228WFPのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Dell E228WFP 38 ページ。 Flat panel monitor
Dell E228WFP にも：セットアップマニュアル (2 ページ), パンフレット＆スペック (3 ページ), ファクトシート (4 ページ), ユーザーマニュアル (8 ページ)

Input select

OSD menu / select

Brightness/Contrast Hot Key

Down (-) and Up (+)

Use the Input Select button to select between two different video signals that may be connected to your monitor.

Description of auto- sync detect: If both VGA and DVI cables are connected to one PC, this monitor will display an

image automatically just as long as a video signal is present in either VGA or DVI outputs. When connecting one

display to two PCs, if using screen savers, best to set both to the exact times. Whichever mouse is moved first will

activate that video input first.

NOTE: The floating 'Dell Self-test Feature Check' dialog appears on a black background if the monitor

cannot sense a video signal. Using the input select button, select the desired input to be tested either

Analog Input or Digital Input. Disconnect the video cable from the video card and the Dell Self

Feature Check dialogue box will appear if the display is operating correctly.

The Menu button is used to open and exit the on-screen display (OSD), and exit from menus and sub-menus. See

Using the OSD

Menu.

Use this button for direct access to the "Brightness" and "Contrast" control menu.

Use these buttons to adjust (decrease/increase ranges) items in the OSD menu.

NOTE: You can activate automatic scroll feature by pressing and holding either + or - button.