- ページ 5
モニター Dell E228WFPのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Dell E228WFP 38 ページ。 Flat panel monitor
Dell E228WFP にも： セットアップマニュアル (2 ページ), パンフレット＆スペック (3 ページ), ファクトシート (4 ページ), ユーザーマニュアル (8 ページ)
ページを印刷する
Note: Pin 1 is at the top right.
Pin Signal Assignment
Pin Signal Assignment
1
T.M.D.S. Data 2-
9
T.M.D.S. Data 1-
2
T.M.D.S. Data 2+
10 T.M.D.S. Data 1+
3
T.M.D.S. Data 2 Shield 11 T.M.D.S. Data 1 Shield 19 T.M.D.S. Data 0 Shield
4
No Pin
12 No Pin
5
No Pin
13 No Pin
6
DDC Clock
14 +5V Power
7
DDC Data
15 Ground (for +5V)
8
No Connect
16 Hot Plug Detect
Plug and Play Capability
You can install the monitor in any Plug and Play-compatible system. The monitor automatically provides the computer system with its Extended Display
Identification Data (EDID) using Display Data Channel (DDC) protocols so that the system can configure itself and optimize the monitor settings. If desired, you
can select different settings, but in most cases monitor installation is automatic.
General
Model number
Screen type
Screen dimensions
Preset display area:
Horizontal
Vertical
Pixel pitch
Viewing angle
Luminance output
Contrast ratio
Faceplate coating
Backlight
Response Time
Resolution
Horizontal scan range
Vertical scan range
Optimal preset resolution
Highest preset resolution
Video display capabilities(DVI HD playback)
Pin Signal Assignment
17 T.M.D.S. Data 0-
18 T.M.D.S. Data 0+
20 No Pin
21 No Pin
22 T.M.D.S. Clock Shield
23 T.M.D.S. Clock +
24 T.M.D.S. Clock -
E228WFP
Active matrix - TFT LCD
22 inches (22-inch viewable image size)
473.76 mm (18.65 inches)
296.1 mm (11.66 inches)
0.282 mm
160° (vertical) typ, 160° (horizontal) typ
300 CD/m ²(typ)
800 to 1 (typ)
Antiglare with hard-coating 3H
CCFL edgelight system
5ms typical
30 kHz to 83 kHz (automatic)
56 Hz to 75 Hz (automatic)
1680 x 1050 at 60 Hz
1680 x 1050 at 60 Hz
480p/576p/720p