- ページ 18

ストレージ Dell Storage MD1400 seriesのPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Dell Storage MD1400 series 37 ページ。 Storage enclosure
Dell Storage MD1400 series にも：スタートマニュアル (7 ページ), 管理者マニュアル (48 ページ)

ページを印刷する

NOTE: Stacking the EMM will damage the sensitive EMI contacts

Figure 12. Removing and installing an EMM

release lever

release tab

Installing an EMM

CAUTION: Many repairs may only be done by a certified service technician. You should only

perform troubleshooting and simple repairs as authorized in your product documentation, or as

directed by the online or telephone service and support team. Damage due to servicing that is

not authorized by Dell is not covered by your warranty. Read and follow the safety instructions

that came with the product.

Insert and seat the EMM into the EMM bay.

Push the release lever toward the chassis until it clicks into place.

Connect all the SAS cables to the EMM.

For information about the latest firmware, see the Dell Support website at dell.com/support

If applicable, update the firmware of the EMM.

NOTE: If two EMMs are installed in the enclosure, you must ensure that both the EMMs have the

same firmware version installed. You can verify if both the enclosures use the same firmware version

by checking the LEDs on the enclosure or by using Server Administrator.

For more information about EMM connections and cabling, see Dell Storage MD1400 and MD 1420

Enclosure Hardware Deployment Guide.

EMM