- ページ 13

スイッチ Dell MXG610sのPDF セットアップマニュアルをオンラインで閲覧またはダウンロードできます。Dell MXG610s 17 ページ。 Fibre channel switch module
Dell MXG610s にも：セットアップマニュアル (13 ページ)

For instructions specific to a cable type, see the cable manufacturer's documentation.

Port-side LEDs

Each switch module uses bicolored external LEDs to indicate operation status. After you

install the switch module in a blade server chassis I/O module, the LEDs become active.

Figure 11. Switch module front panel LEDs

FC port 0 status LED

FC port 24 status LED

Module identification LED

Table 1. Port-side LEDs

LED

Module power and status LED

Module identification LED

FC port 17 status LED

Module power status LED

Description

•

Solid green—The switch is working

correctly.

•

Blinking amber—The switch is working

incorrectly. The temperature may be too

high, a software error has occurred, or

another error is discovered.

•

Off—There is no power supplied to the

FC switch module. Reseat the module

and ensure that the chassis power is on

and it has adequate power for the I/O

module.

•

Off—Module is not identified.

MXG610s Setup Guide