Support for CPU Turbo Mode on certain SKUs (Increases processor frequency if operating below
thermal, power and current limits)
Streaming SIMD (Single Instruction, Multiple Data) Extension 4
Intel 64 Technology
Intel VT-x and VT-d Technology for virtualization support
Enhanced Intel SpeedStep
Demand-based switching for active processor power management as well as support for ACPI
P-states, C-states, and T-states
FlexMem Bridge
The PowerEdge M910 also introduces a new, Dell patent-pending technology that allows flexibility
in processor and memory scalability — FlexMem Bridge. The FlexMem Bridge allows the full amount
of addressable DIMMs on four-socket systems with Intel Xeon processor E7-2800, E7-4800 and
E7-8800 product families and Intel Xeon processor 7500 and 6500 series to be accessed, even
when only two of the processors are in place, in a completely passive solution (no active
components).
I/O Hub (IOH) with Intel QuickPath Architecture
The Intel QuickPath Architecture consists of serial point-to-point interconnects for the processors
and the system IOH. The M910 has a total of eight QuickPath Interconnects (QPI) lines: six links
connecting the processors and two links connection processors 1 and 2 with the IOH.
DDR3 memory
The M910 uses DDR3 memory, which provides a high-performance, high-speed memory interface
capable of low latency response and high throughput. The M910 supports registered ECC DDR3
DIMMs (RDIMMs).
The DDR3 memory interface consists of eight Intel callable memory buffers (SMBs), each of which
has two DDR3 memory channels. Each channel supports up to two RDIMMs for single-, dual- and
quad-rank. By limiting the M910 to two DIMMs per DDR channel, the system can support quad-rank
DIMMs at 1067MT/s.
PCIe 2.0
PCIe is a serial point‐to‐point interconnect for I/O devices. PCIe 2.0 doubles the signaling bit rate of
each lane from 2.5Gbps to 5Gbps. Each of the PCIe 2.0 ports is backwards‐compatible with 1.0
transfer rates.
Internal redundant SD module
The internal SD module is dedicated for an SD Flash Card with embedded Hypervisor for
virtualization. The SD Flash Card contains a bootable OS image for virtualized platforms.
The persistent storage solution on the M910 allows for redundant SD cards.
iDRAC6 Express
The iDRAC6 Express feature set is a managed persistent storage space for server provisioning data.
It consists of 1GB flash and vFlash (an optional externally accessible SD card). vFlash offers the
hot-plug portability and increased storage capacity benefits of SD while still being managed by the
system.
PowerEdge M910 Technical Guide
®
Technology
10
ページを印刷する