- ページ 16

スイッチ Dell S5048F-ONのPDF セットアップマニュアルをオンラインで閲覧またはダウンロードできます。Dell S5048F-ON 29 ページ。
Dell S5048F-ON にも：ファームウェア・アップデート (19 ページ)

To remove the two screws from each front flange ear on the switch side of the rail and

remove each latch casting, use a Torx screwdriver. Retain the latch castings for future

rack requirements. It is not necessary to remove the back flange castings.

Figure 4. Two-post flush-mount installation

Attach one rail to the front post flange with two user-supplied screws, item 2.

Slide the plunger bracket forward against the vertical post and secure the plunger

bracket to the post flange with two user-supplied screws, item 3.

Repeat this procedure for the second rail.

S5048F-ON switch installation