- ページ 7
ネットワーク・ハードウェア AVYCON AVR NT832AのPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。AVYCON AVR NT832A 11 ページ。
ページを印刷するClick "Refresh" to refresh the list of online IP cameras which are in the same local network
with the DVR. Click + to add the searched camera. Click "Add All" to add all the cameras in
the list. Click
to delete the added camera. Click "Delete All" to delete all the added
cameras.
Mac Address
Address
Subnet Mask
Gateway
Username
Password
④ Click
to edit an IP camera as shown on the above left. Enter the new IP address,
subnet mask, gateway, username and password of the camera. Click "OK" to save the
settings.
Click
to edit the added camera as shown on the above right. Enter the new camera
name, IP address, port, username and the password of the camera. You can click "Test"
to test the effectiveness of the input information. Click "OK" to save the settings. Only
the camera name can be changed for analog cameras or online IP cameras you added.
Click "Next" to continue.
9 RAID Settings
Check "Enable RAID" and then the device will automatically reboot. Then enter Wizard and
create an array. The authority authentication box will pop up when creating an array.
Please enter the username (admin) and password you set before.
Disk Mode
Set array name, array type and physical disk as needed (See Disk Management of User
Manual for more details). Then click "Next".
5
NETWORK VIDEO RECORDER | AVR SERIES | RAID SETTINGS
Edit IP
CE :98 :23 :75 :35 :22
192 .168 . 1 . 45
255 . 255 . 255 . 0
192 .168 . 1 . 1
admin
OK
Cancel
Wizard
Enable RAID
Cancel
Previous
Next
Edit Camera
IP Camera 1
Camera Name
Address
192 . 168 . 1 . 58
Port
9008
Protocol
XXX
Model
XXX
Username
admin
Password
Test
Wizard
Disk Mode
Create an array
Array Name
Test
Array Type
RAID5
Physical Disk
1
2
3
Global Hot Spares
None
Array Capacity
0GB
Previous
Sync to IPC
OK
Cancel
4
5
6
7
8
Next
Cancel