- ページ 31
洗濯機 Miele PW 6101のPDF プログラミング説明書をオンラインで閲覧またはダウンロードできます。Miele PW 6101 48 ページ。 Profitronic m innovation m
Miele PW 6101 にも： 取扱説明書 (44 ページ), 取扱説明書 (46 ページ), プログラミング説明書 (48 ページ)
ページを印刷する
Dispenser calibration
The dispensers need to be calibrated to
ensure the dispenser pumps supply the
correct amount of liquid agent.
Supervisor level ~ Settings
Dispenser calibration
Dispensing throughput
After selecting "Dispenser calibration":
Settings ~ Dispenser calibration
Dispenser pump 1
Dispenser pump 2
Selection choice: 1 to 13
After selecting a dispenser pump the
following message will appear in the display:
Dispenser calibration ~ Dispenser pump 1
V: 100ml
t: 0s
The amount to dispense can be set between
0 and 999 ml in 1 ml increments.
After selecting the parameters you want
press the multi-function dial to activate the
dispenser pump.
Dispenser calibration ~ Dispenser pump 1
V: 100ml
t: 30s
The dispensing process finishes once the
dispensing amount is reached by pressing
the 0/1 button, or stops automatically after
60 seconds. The duration t measured will be
shown in seconds and the amount drawn P
will be shown in ml/min.
Press the S "Save" button to save the
values.
M.-Nr. 06 533 430
-
e
A
e
A
P: 200,0ml/min
0/1
S
A
P: 200,0ml/min
0/1
S
A
It is also possible to go straight into
dispenser calibration. Switch the machine
on. Then press the multi-function dial in and
switch the machine on with the "Mains On"
switch.
Dispenser throughput (D1 to D13)
The throughput can be set for connected
dispensers in 1 ml/min increments from
0 ml/min to 999 ml/min.
Supervisor level ~ Settings
Dispensing throughput
Dispensing correction factor
After selecting "Dispenser throughput":
Settings ~ Dispensing throughput
Dispenser pump 1: 100,0 ml/min
Dispenser pump 2: 100,0 ml/min
Selection choice: - No
- 1 to 999,0 ml/min
Settings
-
e
A
e
A
31