- ページ 27

オーブン Miele KM 5656のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Miele KM 5656 40 ページ。 Ceramic cooktop
Miele KM 5656 にも：操作およびインストール手順 (44 ページ), 仕様 (7 ページ), 製品と切り出し寸法 (1 ページ)

ページを印刷する

What if one or more residual heat indicators flash?

Possible fault

There was a power failure during use.

The burners are turned off.

The residual heat indicators were lit

while the programming mode, e.g.

Safety Lock, Stop and Go, was

selected.

What if when the cooktop is turned off, the burner displays show A, F and

numbers?

Possible fault

The touch controls could not be reset

automatically. They must be reset

manually.

What if the rear burner display shows F, the front burner display shows E

and the timer shows numbers?

Possible fault

Trip the circuit breaker to the cooktop or

disconnect the appliance from the main

power supply for 1 minute.

Frequently asked questions

Fix

Turn the cooktop on as usual.

The residual heat indicators will flash

for about 45 minutes after leaving the

programming mode.

The cooktop can be used as usual.

Fix

See, "Resetting the touch controls -

Manual reset".

If the problem persists, call Miele

Technical Service.

Fix

If the problem persists, call Miele

Technical Service.