- ページ 36

換気フード Miele DA 218のPDF 操作およびインストール手順をオンラインで閲覧またはダウンロードできます。Miele DA 218 44 ページ。 Ventilation system
Miele DA 218 にも：操作およびインストール手順 (44 ページ)

Installation

Recirculation connection

Recirculation mode is used when

venting to the outside of the building is

not possible.

^ Slide the diverter on to the brackets

of plate B.

^ Slip the hose clamps over the flex

hose onto the diverter and the motor

assembly exhaust connection. Once

in place, tighten the hose clamps.

Active charcoal filters must be used

in the recirculation mode.

Attaching the chimney

extension

The use of a chimney extension, allows

the hood to be installed at various

distances from the ceiling.

NOTE: The extension must be

intalled in relationship to the method

of venting; Extraction or

Recirculation.

Recirculation

The extension piece has vented

openings on one end.

These vents are required for recir-

culation mode and will be closest to the

ceiling when installed.

For air extraction, the vents are not

required and are covered by the

chimney.