- ページ 36

換気フード Miele DA 219-2のPDF 操作およびインストール手順をオンラインで閲覧またはダウンロードできます。Miele DA 219-2 44 ページ。 Ventilation system
Miele DA 219-2 にも：操作およびインストール手順 (40 ページ)

Installation

Air extraction exhaust

connection

^ Connect the ductwork to the exhaust

connection using whatever means

are appropriate for the type of

ductwork being installed (hose

clamp, duct tape, etc.)

^ Direct the duct through the back wall

or the ceiling.

^ See "Air extraction" for further details.

Recirculation connection

Recirculation mode is used when

venting to the outside of the building is

not possible.

^ Slide the diverter on to the brackets

of plate B.

^ Slip the hose clamps over the flex

hose onto the diverter and the motor

assembly exhaust connection. Once

in place, tighten the hose clamps.

Active charcoal filters must be used

in the recirculation mode.