- ページ 18
換気フード Miele DA 430-4のPDF 操作およびインストール手順をオンラインで閲覧またはダウンロードできます。Miele DA 430-4 36 ページ。
Miele DA 430-4 にも： 操作およびインストール手順 (32 ページ)
ページを印刷する
Operation
Filter operating hours counter
The number of hours the appliance has
been in operation is stored in memory.
The operating hours counter tells you
when the grease filter and the outer
filter need to be cleaned.
Resetting the filter operating hours
counter
After 30 hours of operation (or another
time if the operating hours counter has
been altered), the grease filter indicator
lamp will light up. The grease filter and
the outer filter must then be cleaned.
Afterwards, the filter operating hours
counter must be reset.
^ To do this, press and hold the grease
filter control for approximately
3 seconds while the fan is switched
on.
The indicator lamp for the control will
go out.
18
Reading the filter operating hours
counter
To check the percentage of time set
already used:
^ Press the On/Off control to switch the
fan on.
^ Press and hold the grease filter
control.
One or more of the indicator lamps for
the – /+ controls will flash.
The number of flashing lamps shows
the percentage of the operating time
which has already been used up.
1 lamp
= 25 %
2 lamps = 50 %
3 lamps = 75 %
4 lamps = 100 %
The number of operating hours used
remains in the memory, even when the
appliance is switched off or there is a
power cut.