- ページ 17

換気フード Miele DDG 102のPDF 取付説明書をオンラインで閲覧またはダウンロードできます。Miele DDG 102 28 ページ。 External motor roof installation
Miele DDG 102 にも：操作および設置マニュアル (24 ページ), 操作およびインストール手順 (28 ページ), 取付説明書 (28 ページ)

ABLG 202

1) Suction side

The ABLG 202 external motor is

designed for installation inside the

house. Possible locations:

– In the attic or ceiling space

– In an adjoining room, e.g. a pantry or

garage

– In the kitchen, if sufficient insulation

is used

It can be installed horizontally or

vertically.

If installing vertically please observe

the instructions on the next page.

The external motor is connected to the

cooker hood by means of a control

cable and is operated by the controls

on the cooker hood.

Please refer to the operating and

installation instructions for the

cooker hood before installing the

external motor and ducting.

 Position the external motor in a

suitable location.

Pay particular attention to the

direction of the ducting

 Mark the positions for the four motor

base plate holes on the installation

surface.

 Place the motor to one side.

 Drill 4  8 mm holes in the positions

marked to a depth of 40 mm for

securing the external motor.

 Press S 8 plugs into the drill holes so

that they are flush.

 Connect the 3 mountings through the

fixing holes in the motor unit base

plate as illustrated.

 Secure the motor with the screws

supplied.

Installation